s30d30c ? s30d60c 1 of 4 ? 2006 won-top electronics pb s30d30c ? s30d60c 30a dual schottky barrier rectifier features ! schottky barrier chip h ! guard ring for transient protection ! low forward voltage drop ! low reverse leakage current s j ! high surge current capability ! plastic material has ul flammability r k classification 94v-o pin1 2 3 l p mechanical data n ! case: to-3p, molded plastic ! terminals: plated leads solderable per m mil-std-750, method 2026 a ! polarity: see diagram b ! weight: 5.6 grams (approx.) ! mounting position: any ! mounting torque: 11.5 cm-kg (10 in-lbs) max. c ! lead free: for rohs / lead free version, add ?-lf? suffix to part number, see page 4 pin 1 - + g d pin 3 - case, pin 2 e maximum ratings and electrical characteristics @t a =25c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol s30d 30c s30d 35c s30d 40c s30d 45c s30d 50c s30d 60c unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 30 35 40 45 50 60 v rms reverse voltage v r(rms) 21 25 28 32 35 42 v average rectified output current @t c = 95c i o 30 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 275 a forward voltage @i f = 15a v fm 0.55 0.65 v peak reverse current @t a = 25c at rated dc blocking voltage @t a = 100c i rm 1.0 60 ma typical junction capacitance (note 1) c j 1100 pf typical thermal resistance junction to case (note 2) r jc 1.4 c/w operating and storage temperature range t j , t stg -65 to +150 c note: 1. measured at 1.0 mhz and applied reverse voltage of 4.0v d.c. 2. thermal resistance junction to case mounted on heatsink. wte power semiconductors to-3p dim min max a 3.20 3.50 b 4.70 5.30 c ? 23.00 d 19.00 ? e 2.80 3.20 g 0.45 0.85 h ? 16.20 j 1.70 2.70 k 3.15 ? 3.65 ? l ?4.50 m 5.25 5.65 n 1.10 1.40 p ?2.50 r 11.70 12.70 s 5.00 6.00 all dimensions in mm
s30d30c ? s30d60c 2 of 4 ? 2006 won-top electronics 0.1 1.0 10 100 0.2 0.4 0.6 0.8 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fig. 2 typical fwd characteristics per element f s30 d 30 c - s30 d 45 c s30 d 50 c - s30 d 60 c t = 25c pulse width = 300 s 2% duty cycle j 0 50 100 150 200 250 300 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fig. 3 max non-repetitive peak fwd surge current 8.3 ms single half-sine-wave jedec method 100 1000 4000 0.1 1.0 10 100 c , junction capacitance (pf) j v , reverse voltage (v) fig. 4 typical junction capacitance per element r t = 25c f = 1mhz j 0.01 0.1 1.0 10 100 i , instantaneous reverse current (a) r 04080 percent of peak reverse voltage (%) fig. 5 typical reverse characteristics per element t = 100c c t = 75c c t = 25c c 120 0 6 12 24 30 18 0 50 100 i , average rectified current (a) (av) t , case temperature (c) fig. 1 forward derating curve c 150
s30d30c ? s30d60c 3 of 4 ? 2006 won-top electronics marking information packaging information tube size l x w x h (mm) quantity (pcs) inner box size l x w x h (mm) quantity (pcs) carton size l x w x h (mm) quantity (pcs) approx. gross weight (kg) 505 x 46 x 6.5 30 520 x 145 x 95 1,200 540 x 306 x 115 2,400 18.0 recommended screw mounting arrangement note: 1. anti-static tube, water clear color. bulk s30dxxc = device number xx = 30, 35, 40, 45, 50 or 60 polarity = as marked on body plain washe r rectifie r insulato r heatsink 6-32 hex nut recommended isolated mounting when screw is at heatsink potential. 6-32 hardware is used. a conical washer should be used to apply proper force to the device. screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. the interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. 6-32 hex head scre w conical washe r s30dxxc
s30d30c ? s30d60c 4 of 4 ? 2006 won-top electronics ordering information product no. package type shipping quantity s30d30c to-3p 30 units/tube s30d35c to-3p 30 units/tube s30d40c to-3p 30 units/tube S30D45C to-3p 30 units/tube s30d50c to-3p 30 units/tube s30d60c to-3p 30 units/tube 1. shipping quantity given is for minimum packing quantity only. for minimum order quantity, please consult the sales department. 2. to order rohs / lead free version (with lead free finish), add ?-lf? suffix to part number above. for example, s30d30c-lf . won-top electronics co., ltd (wte) has checked all information carefully and believes it to be correct and accurate. however, w te cannot assume any responsibility for inaccuracies. furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. wte reserves the right to change any or all information herein without further notice. warning : do not use in life support equipment. wte power semiconductor products are not authorized for use as critical components in l ife support devices or systems without the express written approval. we power your everyday. won-top electronics co., ltd. no. 44 yu kang north 3rd road, chine chen dist., kaohsiung, taiwan phone: 886-7-822-5408 or 886-7-822-5410 fax: 886-7-822-5417 email: sales@wontop.com internet: http://www.wontop.com
|
